Majority of us will jump in the shower most mornings before we begin our busy schedules for the day.. but is the place that is meant to be making us feel clean and fresh in the morning.. really showering us down with built up scum! Yuck!
It’s a place where most of us don’t think to clean or feel the need to clean this as it cleans us! Well STOP before you take your next one!
3 things you can check right now on your shower head to see if you need to use this top cleaning tip! To make sure you are being cleaned too.
1. Is your shower performing to it’s best! Or are you struggling to get a trickle out of it in the morning?
2. When the water is spraying out is it powering down over you or deciding to spray in all sorts of directions?
3. If you look closely ( when the water isn’t on) check your shower head holes don’t have any dodgy yellow or brown looking stains around the holes!
If you experience any of those you can use this great cleaning tip and clear up any limescale that you don’t want to take out with you for the day!
Simply all as you need is a plastic bag or sandwhich bag.
Pour and equal amount of distilled white vingear and hot water into the bag, enough to cover the shower head in whilst tying a rubber band or bobble around the top of it tightly.
Leave this on for approximately 2 hours. Once the time is up carefully untie the bag off your shower head and dispose of it. Before turning your shower back on check you have no leftover limesclale area’s, if so you can wipe away with a cloth or even use an old toothbrush to make sure those holes are completely clear!
Next you should run your shower to make sure it’s all clear of the products! then you should notice that you have clean running water and no more blocked holes!
Shower power ?